Internal Cab Dimensions

Each "Vertical Valet" Dumbwaiter, is custom manufactured to your specifications.

It is often desirable to define the size of the unit by the interior dimensions of the cab. This will allow you to determine if some special item, a laundry basket or a case of champagne, will fit in the dumbwaiter.

To obtain a shaft size for a particular interior cab size, add the dimensions below to the desired interior cab dimensions. Please keep in mind that our standard unit accommodates a shaft size of a minimum of 20" by 20", a maximum of 30" by 30" (after sheet rock) or any combination of these dimensions and a maximum 34 inch "Rough Opening" for the loading door.

Add 5 ¼ inches to the interior width of the cab for the finished width of the shaft

Add 2 ¼ inches to the interior depth of the cab for the finished depth of the shaft.

Add 4 5/8 inches to the interior height of the cab for the rough, vertical opening height.

These numbers are for our standard unit with doors on the same side at all floors. If your dumbwaiter shaft design is different we will be happy to work with you on your measurements.
Interior

Manufacturing dimensions are based on the finished footprint of the shaft, (Plan view, looking down from above) after the shaft sheet rock is installed.

Cab height is based on the vertical rough opening for the loading door. All vertical dimensions, the height above the lower floor, the height of the cab and the vertical lift are based on the rough dimensions.

The vertical lift is the distance between the bottom sill of the lowest opening to the bottom sill of the highest opening.

A door that you pull towards you from the right side is defined as a right hand door (hinges on left). A door that you pull towards you from the left side is defined as a left hand door (hinges on right).


Vertical Valet…
Convenience, Luxury and Prestige!

Send a message to Vertical Valet
Send a message to Vertical Valet
Send a message to Vertical Valet
Pricing starts as low as $2995


Have questions or want to learn more about Vertical Valet creative solutions?
Feel free to call us at 1-800-825-3880 (Local or International: 1-813-886-5967) or Contact us »by email.
September 21st, 2017

Ultimate Die Corporation

Custom Designed DumbWaiters

P.O. Box 260306     Tampa, FL 33685-0306
Phone: 1-800-825-3880   Local or International: 1-813-886-5967
© 2006-2017 Ultimate Die Corp.    LGI
Privacy Policy »
Factory Direct Custom Dumb Waiters